Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
Posted: Sat Feb 16, 2019 7:42 am Post subject: M38 floor gauge
I know most of the body panels are 18 gauge, and the rear riser is 16 gauge. What gauge is the floor?
I am pretty sure my floor is original. I have a section Bubba cut open and bent
up, who knows why, and the edge appears thicker than 18 gauge. I will try and clean it up and put a dial caliper on it, but wanted to know if the front floors were 16 gauge instead of 18.
Joined: Aug 22, 2016 Posts: 117 Location: Huntsville, AL
Posted: Sat Feb 16, 2019 3:33 pm Post subject:
I cut out a section of rusted floor in my M38 and the thickness was the same as the 18 gauge I welded back in. _________________ 1951 M38 MC 22731
(Converted 12v, Carter WO carb, single action fuel pump, electric wipers)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum