Hi everyone. I am driving a new to me 1970 M38a1 drive train.
I just completed a restoration. I did not look at the clutch
Vehicle starts and drives well
Transmission shifts very well
All universals replaced
All gearboxes gl4 gear oil 90w
Clutch adjustment 1 1/2 “ free play
In third at around 40 mph. There is a raspy rattling noise.
When I depress the clutch at 40 mph raspy rattling sound stops
It sounds like it is coming from gearshift forward / floorboards
Firewall centrally back
I reviewed my manual and clutch springs are mentioned
This is not my expertise at all
Any thoughts?
How should I approach this?
Thank you for helping me
Jay Orchard. London Ontario
1970 M38a1. CND 3
Remove the entire center floor cover. Get a stethoscope and have someone drive while you listen and try to pinpoint the source. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum