Joined: Apr 18, 2005 Posts: 454 Location: Rhode Island
Posted: Sun Nov 09, 2008 4:52 pm Post subject: tire repro
I did not take any pictures of the before and after on my repro tire bracket. I purchased it at the Weare Rally from Pete Debella a few years back. Note that there is rumor that the quality has recently been improved.
- The holes were in the wrong place for bolting to the tailgate. I had to fill and redrill two holes. They were not close, they were about an inch wrong.
- The holes to mount the small bracket onto the big bracket are the wrong size if you plan to replace the repro bolts (of unmarked unknown quality) with the original bolts. Minor opening of the holes was requied.
- Paint - bad with no primer - plan to strip to bare metal and repaint.
- Reflector - The reflector ring that came with the repro had the holes in the wrong spot. I cant remember if they were at the 2 and 8 oclock position when they should have been at 10 and 4 or other (I will edit this section later). The solution is to weld/fill the holes and drill new in the correct place. I had an original reflector ring that uses flathead screws. The repro uses panhead screws and had a stepped hole instead of tapered hole.
Overall, not counting time to wait for paint to dry I put about an hour into fixing holes and repainting the repro. It is now installed, looks very good and seems to be very solid. My original bracket was repaired by bubba after he got a welder for christmas. There are a bunch of angle irons attached and severe cracks that had been welded are evident. It shows what abuse that bracket has to endure. Making a good comparison between the repro and original is difficult considering how bad my original is.
Joined: May 14, 2007 Posts: 707 Location: Placentia, CA
Posted: Tue May 24, 2011 8:07 am Post subject: Spare Tire Carrier
Here is a picture of the spare tire carrier that I purchased from Pete Debella about 5 years ago. I also pruchase a spare rim. The carrier looks pretty good but the rim is an obvious repro. My tailgate is also a reproduction that was purchased by the previous owner. As you can see, the reflector mounting holes are at the 2 and 8 oclock possition as mentioned above. I have not decided if I will keep this one or find an original. That part is way down the road for me.
I know this thread is old, but the spare tire brackets currently made by, and sold by, Midwest Military, unpainted, are perfect in every respect and fit onto an original May 1951 M38 Tail gate perfectly. I installed one last year. _________________ M38 23100 June 51
M38 34523 Sep 51
M606/CJ3B 1964 Kaiser 57348 118458
Willys MB 1944
Ford GPW 1942
Dodge WC63 1943
Dodge Power Wagon WM300 1967
Plymouth Barracuda, 1973, 340 4 barrel
All ground up restored by me.
Lots of others.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum