Posted: Thu Mar 10, 2022 3:27 pm Post subject: M38a1 fender splash shield
Putting in my heater on my m38a1. Directions say to attach braceto the fender splash shield. I looked and don't see it. Anyone have a picture of it so I can see what it looks like. Thanks
May be too late as your original post was a week ago, but I just finished installing the hot water heater kit in my 53. Mine has the center grill attachment and the 2 support rods from the grill to the cowl. If you follow the directions exactly as described in the installation instructions, the heater out flow and the support rod (from cowl to grill) are at the same level and you can not hook up the heater hose. I did not figure this out until after I had already drilled the 5 holes in the fender, so dry fit every thing before you drill.
After all was done it was great having heat in the jeep, and that unit puts out a lot of heat.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum