Posted: Mon May 16, 2005 8:31 pm Post subject: venting distributor
there has been a lot of previous discussion on venting the dist,by venting through the fuel pump vaccum lines, my m/38 has the 24v dist, that is pluged off top and bottom. i dont have the military fuel pump. is there another way that i could get some cooling to the distributor.my m/38 has electric wipers. it all came that way. thanks to all
newton
Newton,
You could just connect a 1/8" tube to the intake with a soldered shut brass fitting adapter thru which you then drill a .040 hole and connect to one side of the distributor then connect an unobstructed 1/8" tube to the air intake at the crossover or the air filter. You really should maintain a vented distributor. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum