Joined: May 28, 2007 Posts: 97 Location: Denver, NC
Posted: Sun Jul 22, 2007 5:54 pm Post subject: Stuck motor
When I bought it over Memorial Day, the motor was stuck. I shot PB Blaster in all four and left it for a week. Then I filled all four with Marvel Mystery Oil. This weekend, I pulled the grill and the radiator. I was able to get a socket and pull handle on the crank nut, but no motion. Granted, I didn't try to force the pull handle. I pulled the carb for rebuild. I removed the valve cover and things looked OK. I would love to free the motor up without pulling it, but I am afraid that is next. Ideas?
Pull the side valve cover cover and check for a stuck valve in the guide. With a little patience these can aslo be freed up. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
I've had some valves stuck so tight I've had to pull the head and spray & soak the stems for a day and slowly work them closed while tapping on the with a brass hammer as I try to rotate the crank _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum