Joined: Apr 03, 2005 Posts: 271 Location: Chester County, PA
Posted: Mon Aug 06, 2007 12:01 pm Post subject: M100 Hole Locations
Hi all,
I need the hole locations of the shock absorber rivit holes, and any holes on the rear bumper. I definitally need the diameter's of the rivet holes, but the diameters of the holes on the rear bumper would be good too.
This is what my shock mounts used to look like.
Bubba was definitally here, and I don't trust his measuring techniques and would rather not use the ones he had. _________________ Bob Collins
1954 M38A1 MD79056
Joined: Apr 03, 2005 Posts: 271 Location: Chester County, PA
Posted: Tue Aug 07, 2007 8:55 am Post subject:
Sorry for the sloppy lingo.
As for the actual mounts, they are not missing. Just the metal that they were bolted to had been cut and welded, and I dont trust bubba's craftmanship here.
The rear bumper, or cross member, whatever you want to call it, was also dented up pretty bad and looked like it had been tampered with, so I cut out the majority of it and welded a new piece of bent plate in.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum