Joined: Apr 06, 2009 Posts: 3 Location: Southern California
Posted: Thu Apr 09, 2009 10:21 am Post subject: Roll-cage for MB, GPW, or CJ2A- $150
I'm selling a bolt-in roll-cage that was professionally built to fit an MB GPW or CJ2A. The cage was built by Richardson Bros 4WD of Oregon. The cage is used, undamaged, and just needs a light sanding and some paint- absolutly no rot, dents, or damage to the integrity of the structure. This is a full cage with down tubes going to the front floorboards, not just a roll-bar. I was going to strip it and spray it with black rustoleum but I think its better to see the current condition so nothing is hidden. The measurements are- 46" wide between the 2 front down tubes at the floor, 55" wide at the rear to outside of rear brackets, approx 63-64" length from center of front down tube to the end of the rear brackets. I never installed the cage but it had it been sitting in my GPW- fits perfectly. I can email numerous pictures and give more dimensions if interested. $150 takes it home. Located in Southern California. Pick up only....too big to ship.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
