| View previous topic :: View next topic |
| Author |
Message |
Cacti_Ken
Member
Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas
|
 Posted: Mon Aug 08, 2005 10:56 pm Post subject: slotted plate on tailgate |
 |
|
Does the M38 tailgate suppose to have a slotted plate attached to it for the jerry can strap? If so where might I find one?
_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
| Back to top |
|
 |
OKCM38CDN
Guest
|
| Posted: Tue Aug 09, 2005 3:46 pm Post subject: |
|
|
My M-38 CDN does... You probably could make one out of stock material...
Where the strap attaches to the tailgate... not a great picture but that is where it goes.
Hope This Helps... |
|
| Back to top |
|
|
GregS
Member
Joined: Apr 13, 2005
Posts: 174
|
| Posted: Tue Aug 09, 2005 7:45 pm Post subject: |
|
|
Ken,
This is a good photo Pat Newman sent me once. I have a couple more if needed.
Greg
 |
|
| Back to top |
|
|
Cacti_Ken
Member
Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas
|
| Posted: Wed Aug 10, 2005 8:22 pm Post subject: |
|
|
Thanks guys, I'll see if I can make something that will work. It's hard to tell what the dimentions are from the photo, but maybe it will work out.
_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
| Back to top |
|
|
GregS
Member
Joined: Apr 13, 2005
Posts: 174
|
| Posted: Thu Aug 11, 2005 7:36 am Post subject: |
|
|
| Well, if you have a strap you can see the slot is just slightly bigger than the strap and the metal on each side of the slot is about 1/4". |
|
| Back to top |
|
|
|
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
