M38A1 Copper Vent Line Help

[OKCM38CDN]

I am in need of M-38A1 assistance as I do not own one...

I have been researching the 3/16" copper vent lines used on the M-38A1 and have found the following lines Per SNL G-758, Dated Sept 1956. Please look over the list and let me know of any others you may suspect. I have left out the brake lines shown in the SNL as I feel those need to be steel.

Also should there be Conduit (Loom) on any that do not show it?

Once I verify these lines are correct, I will start to offer them as a set on the For Sale board...

8328408
LINE, crankcase to cylinder head, assy
Composed of:
2 NUT
1 TUBE (19 3/8 in lg)

8677619
LINE, air cleaner to elbow assy (at dash) (used on vehicles through serial No. 29295)
Composed of:
2 NUT
1 TUBE (22 1/2 in. 1g)

8677523
LINE, carburetor ventilator, assy
Composed of:
2 NUT
1 TUBE (9 1/16 in. lg)

8673356
LINE, distributor to air cleaner tube, assy
Composed of:
2 NUT
1 TUBING (13 in. lg)

8673357
LINE, distributor to vacuum line tee, assy
Composed of:
2 NUT
1 TUBE (26 in. lg)

8677028
LINE, elbow to union, assy.(at dash) (used on vehicles through serial No. 29295)
Composed of:
2 NUT
1 TUBE (16 1/2 in. lg)

WO-808926
LINE, fuel tank to elbow, assy (at tank) (used on vehicles after serial No. 22336 and through serial No. 23359)
Composed of:
2 NUT
1 CONDUIT (16 7/8 in. lg)
1 CONDUIT (7 3/4 in. lg)
1 TUBE (30 3/4 in. lg)

WO-806428
LINE, master cylinder to union, assy (at dash) (used on vehicles through serial No. 29295)
Composed of:
2 NUT
1 TUBE (29 in. lg)

Thank you for your assistance...