View previous topic :: View next topic |
Author |
Message |
Sadler5 Member
Joined: Mar 12, 2007 Posts: 81 Location: Waverly, Illinois
|
Posted: Tue Aug 16, 2011 7:20 pm Post subject: Melling oil pump |
|
|
I searched the site and didn't find anything negative about the Melling oil pump. I have an L134 with a timing change and would like to replace the oil pump. Is the Melling a good replacement?
Thanks |
|
Back to top |
|
|
sonny Member
Joined: Jul 05, 2009 Posts: 136 Location: Mooresville, North Carolina
|
Posted: Tue Aug 16, 2011 7:30 pm Post subject: |
|
|
I have used Melling for years on 60's muscle cars that I restored - have had no problem. I mostly used the high volume rather than the hight pressure pumps. This day and time, I recommend you tear any new pump down and clean it up good - Sonny _________________ 1951 M38, 1952 M38, 1952 M100,1946 Bantam T3-C, RT-66/GRC, PP-112/GR, MT-299, DT-44 Mine Detector, MVPA # 33068, PMVPA CO |
|
Back to top |
|
|
oilleaker1 Member
Joined: May 14, 2009 Posts: 971 Location: South Dakota
|
Posted: Tue Aug 16, 2011 8:11 pm Post subject: |
|
|
My son, and a customer put one in, ran for a while and then pop, broken teeth, ruined cam. No warrenty. Beware! They both re-built their original pumps and won't buy another. It took out the cam too! one was brand new. I'm not buying a Melling. |
|
Back to top |
|
|
G740 Member
Joined: Jan 27, 2006 Posts: 499
|
Posted: Tue Aug 16, 2011 8:37 pm Post subject: Oil Pump |
|
|
If you are interested, I have NOS pumps in stock.
www.midwestmilitary.net
John |
|
Back to top |
|
|
Sadler5 Member
Joined: Mar 12, 2007 Posts: 81 Location: Waverly, Illinois
|
Posted: Thu Aug 18, 2011 6:08 am Post subject: |
|
|
Thanks for the information. I think I have concerns enough to pass on the Melling. Now I'm worried what the pump was in my overhaul kit that was installed on my CJ2A. It is working good but only has a few miles on it. |
|
Back to top |
|
|
artificer Member
Joined: Feb 16, 2007 Posts: 206 Location: Gold Coast Australia
|
Posted: Thu Aug 18, 2011 8:48 am Post subject: |
|
|
I have one on my MB which came in an engine overhaul set done about 8,000-10,000km's since 2009 so I would not be too worried if I were you. _________________ John GIBBINS
ASE Master Medium/Heavy Truck & Auto Technician 2002 USA
Licensed Motor Mechanic NSW # MVIC 49593 Current
YOU CAN'T TROUBLESHOOT WHAT YOU DON'T UNDERSTAND |
|
Back to top |
|
|
|