Joined: Apr 09, 2008 Posts: 22 Location: Bernried near Munich
Posted: Fri Jan 14, 2011 1:03 am Post subject: Footman loop for shovel position M 38
Good morning,
could anyone tell me the distance between the footman loops fixing the shovel (M 3. I could find the diagram but no callout (specification) of the distance of the holes of the loops.
Thank you!
Uwe _________________ 43 MB, 52 M38, 55 Bantam licensed trailer, 08 Commander Hemi, JK Rubi
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
Posted: Mon Jan 17, 2011 8:46 am Post subject:
Hi!! My "51 m-38 tub is off the jeep and sandblasted. I can take a
closeup photo then dimension it if you still need the info.. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a
I have the measurements somewhere. Will have to search for them. Be careful. There are two locations for the handle strap loops. Some had one slightly forward, one slightly aft or some even had both. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
Posted: Tue Jan 18, 2011 11:30 am Post subject:
.
READING YOUR REPLY, WES, GOT ME SECOND GUESSING MY OWN
HOLE PLACEMENTS. THERE WERE NO PIONEER TOOLS OR LOOPS
ATTACHED WHEN I GOT THE 51 M-38, JUST THE HOLES.
THE 2 FRONTMAN LOOP HOLES DIRECTLY TO THE RIGHT OF THE AXE HEAD SHEATH APPEAR TO DRILLED-NOT PUNCHED.
(IGNORE THE PENCIL LINES, THEY FLAG BODY WORK TO BE DONE).
AS ALWAYS, THX FOR THE INPUT..RICK _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
. I could find the diagram but no callout (specification) of the distance of the holes of the loops.
