Joined: Jun 25, 2008 Posts: 583 Location: Kern Co.
Posted: Sat Jun 04, 2011 9:06 am Post subject: Passenger seat adjustment
The rear left foot on the passenger seat on my '53 M38A1 doesn't touch the floor and therefore it rests on the wheel well next to the patent plate.
My question is what parts of the tub should the seat rest on and are there any adjustments that can be made. I can weld if that is what needs to be done.
Usually they get twisted and require straightening for them to set right. The right side is supported by a short piece of horizontal channel on the front end of the wheel house near the Patent plate. The left side of the seat is supported by the short leg. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Jun 25, 2008 Posts: 583 Location: Kern Co.
Posted: Sun Jun 05, 2011 10:04 pm Post subject:
Thanks Wes.
I ended up making something custom. I made a bracket that uses the existing brace behind the passenger seat as a rest. On the other leg of the seat I made an adjustable foot.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum