View previous topic :: View next topic |
Author |
Message |
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Sun Apr 09, 2006 6:13 pm Post subject: Generator Belts |
|
|
Well now I don't know if I have the correct belts or the wrong bracket. When the belts are installed the adjustment bracket is a few inches too long to mount it to the generator.
_________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
OKCM38CDN Guest
|
Posted: Sun Apr 09, 2006 6:40 pm Post subject: |
|
|
Ken, I got mine from NAPA Premium XL 25-7460 is the number on the belt. They are a touch long but I have plenty of adjustment...
Hope this helps... |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Sun Apr 09, 2006 7:08 pm Post subject: |
|
|
Hal does that tension adjustment bracket look like the right one?
The belts, I got from from Brent Mullins. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
BobW Moderator
Joined: Apr 04, 2005 Posts: 219 Location: Monticello, NY
|
Posted: Sun Apr 09, 2006 7:16 pm Post subject: |
|
|
I think your arm is mounted in the wrong location. _________________ Bob W. Monticello, NY. 1952 CJ3A, 1952 M38, 1950 CJV-35/U |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Sun Apr 09, 2006 7:17 pm Post subject: |
|
|
I have screwed up. I am trying to mount the bracket to the water pump bolt. After viewing a photo that Wes has sent me I see my error.
I've got the right stuff, I just didn't realize that I was installing it wrong. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
|