clutch cable/wire

Niclas · Posted: Sat Apr 22, 2006 2:00 pm Post subject: clutch cable/wire

Hi All

What’s the (total) length of the (640124) "cable, clutch control lever"

The 2 I got my hands on seems to a bit to long.
And I had to make a new release rod.

No big deal just a bit annoying

/N

Cacti_Ken · Posted: Mon Apr 24, 2006 9:26 pm Post subject:

I just purchased a new one. The part number on the invoice is 805935, cable, clutch release, original type for seal.

Ordered it for an M38. It measures 11-1/2 inches from tip of ball to end of threaded part that the clevis screws onto.

It is correct for the bell housing that uses a boot for the clutch cable. I don't know if this is same cable you are asking about though.
_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM

Niclas · Posted: Tue Apr 25, 2006 1:32 pm Post subject:

Thx

It helped me Smile

/N

wesk · Posted: Tue Apr 25, 2006 7:07 pm Post subject:

Quite often we get the clutch cross over tube reversed. The longer arm on the tube goes closest to the bell housing. If you go the other way you will not be able to get the clutch to release completely.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

Niclas · Posted: Tue Apr 25, 2006 11:36 pm Post subject:

will check that too.

/N


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.