Joined: Jun 17, 2012 Posts: 159 Location: Minnesota
Posted: Fri Nov 29, 2013 7:58 am Post subject: Ramsey PTO hanger Bearing Help
Does anyone have the dimensions or draft drawings with dimensions for the correct Ramsey 50 PTO Hanger bearing and it's parts? It is the bearing that hangs off the side of the bell housing and has shaft thru it. I have the pictures from the parts manual. This part is very hard to find and I would like to explore as whether this can be remanufactured for a reasonable price.
Dan _________________ Dan Schultz
MD20035 9/1952
MC70324 dod 6/52
GPW 14944 dod 4/10/42
K38 Linemans Trailer 4/43
M100 Trailer 01177488 dod 8/51
Joined: Feb 17, 2012 Posts: 530 Location: Del City, OK
Posted: Fri Nov 29, 2013 12:08 pm Post subject:
Check with Joe from Vintage Wiring Of Maine... I believe he had some made... _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
Good question. Let me help a wee bit. Can someone with a stock M38 winch installation drive support assembly post the measurements I have lettered or numbered in each illustration.
Also can anyone provide the part Timken or other manufacturer's part numbers for the seal Ord # 7411950 (Ramsey 79) (Willys 118276)? _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Jun 17, 2012 Posts: 159 Location: Minnesota
Posted: Mon Dec 02, 2013 7:41 am Post subject:
Any help would be appreciated, even if you don't have all the measurements, I may be able to reverse engineer with at least some measurement(s). I think one of the critical ones would be the length of the drive shaft. Bearing mfg #, Seal mfg #?
Dan _________________ Dan Schultz
MD20035 9/1952
MC70324 dod 6/52
GPW 14944 dod 4/10/42
K38 Linemans Trailer 4/43
M100 Trailer 01177488 dod 8/51
Look in the parts manual. The bearing number is in there. The bearing MRC number crosses to Sealed Power B-104. The old leather seal dimensions are listed in the NSN search. Bore (outer diameter) 1.252-1.256, Shaft (inner diameter) 0.749-0.754 and width 0.469-0.499 all inches. Just take the seal dimensions to to the bearing supply house. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum