Posted: Tue Mar 04, 2014 9:19 pm Post subject: Captivity of oil in tranny and transfer case
I have a chart from tm9-8014 that says the tranny takes one quart of oil. Does anyone know if that's one quart for both the tranny and the transfer case?
Not sure what chart you are looking at in TM 9-8014 but the specs on page 232, Para 192b say 2 pints tranny capacity and the specs on page 236, Para 197b say transfer capacity is 3 pints. The lube chart on pages 60-62 say the tranny and transfer each have their own fill ports and drain ports. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: May 14, 2009 Posts: 971 Location: South Dakota
Posted: Wed Mar 05, 2014 6:32 pm Post subject:
I'd like to jump in on this thread and ask: if you top off the transfercase and drive the Jeep. It worms the oil up and into the transmission. It then drains back into the transfercase down to the " bleed Hole." If you just keep the transfercase topped off, can you assume the tranny is full? John
Not all T90's and D18's will transfer gear oil. I would not assume here. I would stick my finger in both filler plugs to be sure. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum