Joined: May 12, 2014 Posts: 47 Location: Frisco, Texas
Posted: Sun Jun 22, 2014 12:25 pm Post subject: Fuel pump plumbing
Does anyone have a pic showing which inlets and outlets are for fuel and which are vent lines on a M38 dual action fuel pump? I'm replacing the single action fuel pump with the original dual action pump. I think I've got it plumbed right, but I'd like to double check it.
When you ask a technical question always tell us what model jeep you are working on. An easy way to make this happen without any conscious effort is to add your jeep year make & model to your signature block. While you are in there updating your profile fill in your location block so when you do have problems folks can see where you are and quite often you gain new freinds willing to help you out locally.
The illustration used above is for the 52 M38's and, with the addition of the handle for priming the carb, the very early 52/53 M38A1's that left Willys with all the fording system basic plumbing. Many earlier M38's and later A1's were modified in the field for that setup. The USMC contracts in the 60's also had the copmplete fording system basic plumbing. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
