I have a 1953 M38A1. There are a few hole here and there that once held a purpose...most of them I've figured out. However there are two holes forward of the gear shift, on the tub, just before the fire wall.
Sounds like you do not have a copy of the service manual TM 9-8014 for your M38A1 yet. There are many quality photos in there that can help with your problem.
I don't see anything forward of the tranny shifter and before the firewall except the starter pedal hole and several panel bolt holes.
If you are operating without the manuals for your jeep you can certainly go to our web site's "Downloads" page and download them in PDF for free.
Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
Posted: Sat Aug 02, 2014 12:02 pm Post subject:
The floor start switch actually has three bolts, one on top, and two lower towards the gearshift. But if the switch is gone you probably have a large hole in the floor panel right there.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum