Don't have an account yet? You can create one here .
willysmjeeps.com :: View topic - M38 ignition switch (need help with 2 wire numbers)
View previous topic :: View next topic
Author
Message
iceman7273 Member Joined: Jul 09, 2010 Posts: 19 Location: sonoma
Posted: Sat Aug 02, 2014 11:12 pm Post subject: M38 ignition switch (need help with 2 wire numbers)
I was wonder what the 2 wire numbers are? They are missing the tags. Any help would be great.
Back to top
wesk Site Administrator Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
Back to top
4x4M38 Member Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
Posted: Sun Aug 03, 2014 2:22 pm Post subject:
Wes,
If the pinouot is the same on all of these switches I think I can help.
I see the ridge for orienting the switch in the dash. There is a small pin on the front of the switch that corresponds to that ridge.
On mine, facing the same direction:
27 and 85 together are at far right.
11 is in the middle at the bottom,
and 12 is at the far left.
Hope this helps.
Brian
Back to top
4x4M38 Member Joined: May 30, 2014 Posts: 3447 Location: Texas Hill Country
Posted: Sun Aug 03, 2014 2:24 pm Post subject:
BTW,
the one labeled 25 in his photo is supposed to be 85, as you noted.
I suspect the original wire tag was damaged where the 8 looked like a 2.
Back to top
iceman7273 Member Joined: Jul 09, 2010 Posts: 19 Location: sonoma
Posted: Sun Aug 03, 2014 11:09 pm Post subject:
Thanks guys. I got it ohmed out
Pat
Back to top
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Powered by phpBB © 2001 phpBB Group
Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the . PHP-Nuke comes with absolutely no warranty, for details, see the .