Posted: Sun Jan 11, 2015 8:59 pm Post subject: Serial Numbers (engine, Body) Question
I have a question in regards to serial numbers on the block. I am in the process of doing a frame up restoration on my '53 M38A1 Willy's.... My serial numbers matched on my engine and my body and I couldn't find one on my frame but that's alright. I just recently had my engine fully machined and rebuilt. They had to mill the top of the motor where the head sits and the serial number (stamp) is no longer there.... What is my best option to replacing it with the number? Any info would be greatly appreciated. Thanks!
MB's and GPW's during WWII came with matching engine and dash plate serials. The post WWII jeeps DID NOT. M38A1 engine serials leaving Willys did not match the body serials. If you have a M38A1 with the same serial on the flat above the water pump and the dash plate then either the dash plate is a replacement with the engine's serial stamped on it or the engine was already decked once and someone stamped the body dash tag serial on it.
At this point you can leave the decked head smooth and you will have lost nothing for it in the M38A1 restoration hobby.
Post photos of the two serial stampings. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
