Posted: Sat Jan 24, 2015 5:46 pm Post subject: Tempeture gauge won't work ???
I have a new gauge. With a new sending unit
I checked continunity of the 33. And 27 tagged wires they are ok
I ran another ground directly to the gauge
Still won't work
I if I put a ohm meter on the 33 wire at the gauge
Should the ohm meter change as the motor warms up.
What should the reading be when the motor is at operating temp...????
There are two separate ground circuits required for the gauge to work properly. The power off 27 passes thru the gauge and on to ground thru the sender. The gauge case must be grounded through the gauge cluster, thru the dash to the tub for the gauge to drive the needle. If eaither ground is poor or missing she won't work properly.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
