Posted: Thu Apr 23, 2015 8:33 pm Post subject: hat channel
I found I had to replace the drivers side floor pan. and the front hat channel kit.
I got lucky cutting the floor pan out, I have a nice fit. so I tacked it in. then laid out the hat channel over the bottom. there was a little warping going on, but I think I have that under control. I'm more concerned with placing the channels correctly.
If I follow the passenger side shadow from the old channel, the drivers side doesn't seem to line up correctly. I've looked through a bunch of photos here and tried the manuals but I'm not finding much to go on.
Anyone have any ideas of to check this?
Posted: Thu Apr 23, 2015 10:20 pm Post subject: photo
not trying to steal your photo, but I thought the best way to show what I'm looking at here
I lined up the holes circled in red. the red mark is where I thought the channel should be but when lined up with the other side in comes out in the area marked orange. If that makes any sense.
Yup I have looked through a bunch of your photos and they have been a great help.....thank you. sometimes there are to many to find what I'm look for......lol. ok sometimes I don't know what I'm looking for.
I'll try and take some photo of it tomorrow to better show what I'm seeing.
This is how I did it. I didn't firm up welding of Hats and tightening of mounting bolts until I test fitted the front sheet metal. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum