Fording intake hose mount

4x4M38 · Posted: Fri Jul 31, 2015 4:23 pm Post subject: Fording intake hose mount

I have a hole cut out of the outside corner
near the top passenger side of my windshield.

I know there is a clamp that ties the hose and support
rod and it is mounted lower on the windshield.

What is the assembly tied to at the top?
Should there be a bracket of some sort
welded to the frame or maybe a hole?

Directions to a photo would be appreciated.
Thanks,
Brian
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

Xamon · Posted: Sat Aug 01, 2015 6:52 am Post subject:

Wes album has the fording kit info,
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album73&op=modload&name=gallery&file=index&include=view_album.php
_________________
Carievale Saskatchewan Canada
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album210&op=modload&name=gallery&file=index&include=view_album.php

keats · Posted: Sat Aug 01, 2015 9:52 am Post subject:

The support rod only attaches at the lower body in front of the door opening in two places. There is no support at the top, only a rubber donut to stop it from hitting the windshield support

see my last photo in my gallery on page 3(keating)

4x4M38 · Posted: Sat Aug 01, 2015 2:10 pm Post subject:

Thanks for the replies guys. Yes I have looked at the fording kit and
parts. So what you are saying is beyond the clamp on the hose and
tube, all the way to the top of the hose with Precleaner on top
there is nothing that ties it to the windshield?
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

4x4M38 · Posted: Sat Aug 01, 2015 7:14 pm Post subject:

So a clarification and an AHA moment from RickG who was kind
and patient enough to explain that the fording intake tube was
in fact not connected to the windshield in any way and if it was
the windshield would not be able to fold down.

Back to the shop where filling of titanium woodpecker bill
holes continues and a patch will be done at the top side
where a chunk is missing.

Thanks to everyone who replied.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.