Emergency brake cable link

[RonD2]

I must admit the same thought occurred to me, what with the open-ended hooks on both ends of the spring and the link. I was thinking when I made my link that if I closed the ends of the link by making a full loop instead of the half loop that it would at least stay captive on the under-body tab and/or spring if it became separated for some reason? Might have to close the ends of the spring as well. I know, unauthorized modifications and the jeep police.

I bought 3 feet of 1/8-inch cold rolled steel rod for $3 to make my link. Enough to make 5 or 9 links. I guess I'll wait and see what happens.....and put one in my on-board spares box next to the cotter pins.....

[BB]

I have all three parts but the wire link is confusing with it’s two different ends.
If I can figure out how to attach a picture I will.
Brian

[RonD2]

Hi Brian,
Unclear what you mean by "two different ends" or "all three parts".
The link should look like this:

By the way, you replied to this old ancient post not your post today.

[Ryan_Miller]

I believe that is called "necroposting"