Slave receptacle.

billybob · Post by **billybob** » Sun Jul 30, 2017 9:31 pm

Does anyone know where I can get the male ends that plug in to the slave receptacle for jump starting an M38? I want to make up a set of jumper cables. Thanks in advance.

Post by **wesk** » Mon Jul 31, 2017 12:10 am

Be sure to specify single or dual pin!

1 pin receptacle

2 pin receptacle

1 pin cable ends

1 to 2 pin and 2 pin to 1 pin adapter.

They are very pricey.

Modern 1 pin $429.00
https://www.aerospecialties.com/aviatio ... connector/

billybob · Post by **billybob** » Mon Jul 31, 2017 5:31 am

I'm sorry I forgot there was more than 1 type. It's the 2 pin type. Second from the top of your illustration.

Post by **wesk** » Mon Jul 31, 2017 8:39 am

If you do a google search this is what you get:

Erik's has the connectors
http://www.eriksmilitarysurplus.com/slcapl2pinst.html

http://www.eriksmilitarysurplus.com/slcapl2pinst1.html

https://www.ebay.com/i/382149810527?chn=ps&dispItem=1
$299 Ebay cable assy.

http://www.militaryjeep.com/parts.html
$150

billybob · Post by **billybob** » Mon Jul 31, 2017 3:37 pm

Thank you Wes. That's what I am looking for. I'll certainly check it out. Thanks again.