M38 fuel shut off

Scott21 · Post by **Scott21** » Thu Aug 13, 2020 3:11 pm

My 52 M38 does not have a fuel shut off. Is there a modern alternative that looks correct?

Scott

Post by **wesk** » Fri Aug 14, 2020 1:38 am

This info will get you started. Google brass fuel shutoff valves and look for one that resembles the original and has 1/8" Pipe ends.

4x4M38 · Post by **4x4M38** » Fri Aug 14, 2020 6:29 am

Not physically exact but will probably do the job:

https://www.ebay.com/itm/1-8-Inch-NPT-T ... 2946495113

Eades · Post by **Eades** » Fri Aug 14, 2020 1:14 pm

Try NAPA or a hydraulic and hose type shop. I got a McMaster-Carr or Eaton/Weatherhead product that is similar and does the trick. It's location is difficult to see so most won't judge you on it. Good luck!

Scott21 · Post by **Scott21** » Fri Aug 14, 2020 3:45 pm

Thanks, Wes, I have been looking for a close match since February. The chart will be a help when I put it together.

Thank you for your response.

Scott

Scott21 · Post by **Scott21** » Fri Aug 14, 2020 3:47 pm

Thanks, Brian, they have that one at ACE

Scott21 · Post by **Scott21** » Fri Aug 14, 2020 3:48 pm

Eades, that does make sense, it's out of the way.

Scott