Tool for king pin race removal/installation

[JeepdaddyRC]

The TM 9-8014 shows a remover and replacer 41-R-2374-760
and screw 41-S-1047-300 for king pin races.
Do these still exist or any suggested alternative?

[wesk]

We old mechanics and by old I mean really old have been using these two tools for 70% of the last century. A long heavy drift pin or punch removes them and the old bearing race is reversed against the new one and used to drive the new race in place.

Perhaps searching for a few more numbers may help locate one?

NSN 5120-00-708-3246 5120007083246
MFR's PN. 41-R-2374-845 ORD PN. 7083246
Remover and Replacer General Characteristics Item Description: Consist of body, upper; body lower; pins (2); finish note:phosphate coat, type Z, class 2, spec MIL-P-16232;USEWITH screw 41-S-1047-330
Willys King Pin Bearing Race U S Army Tank Automotive Command (19207)

NSN FSC NIIN
5305-00-708-3216 5305 007083216 (ORD. PN.)
ITEM NAME INC
Screw 77777 41-S-1047-330 (MFR’s PN.)


MRC PARAMETER CHARACTERISTICS
AGAV End Item Identification 6X6, M38 truck, 2 1/2 ton

TEXT General Characteristics Item Description Mmaterial steel, carbon spec. qq-S -633;FINISH type M, class 2, spec. MIL-P-16232; overall length 9.000 ins; hexagon shaped, 1.5000 ins wide; 0.938 ins threaded along length; hollow center, 8.500 ins deep, 0.875 insdia;