Carburator Question

Discussion topics on Willys Overland M series vehicles

Moderators: TomM, Moderator, wesk

Post Reply
User avatar
Scott21
Member
Posts: 232
Joined: Wed Apr 11, 2007 6:00 pm
Location: Central New Jersey

Carburator Question

Post by Scott21 »

Accelerator pump diaphragm. Should any fuel pass the diaphragm. End cap had fuel in it.
Hard to start and hesitates when accelerating from idle. Distributor, points and coil all good. New plugs. 1952 M38 YS carburator.

Thanks
Scott
User avatar
4x4M38
Member
Posts: 3487
Joined: Thu May 29, 2014 6:00 pm
Location: Texas Hill Country

Post by 4x4M38 »

No Sir.
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16413
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

What is the physical condition of your accelerator pump diaphragm?

Image

This is the correct assembly drawing

Image

This is the incorrect drawing:

Image
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
Scott21
Member
Posts: 232
Joined: Wed Apr 11, 2007 6:00 pm
Location: Central New Jersey

Post by Scott21 »

Everything looked correct. To rips or cracks.

Scott
User avatar
keats
Member
Posts: 342
Joined: Wed Apr 13, 2005 6:00 pm
Location: Middletown Ct

Post by keats »

i have had diaphragms leak around the center metal cup. hard to see.
Gary Keating
1949 C3A, 1952 M38,
1954 M170, 1957 Cj3B
User avatar
Scott21
Member
Posts: 232
Joined: Wed Apr 11, 2007 6:00 pm
Location: Central New Jersey

Post by Scott21 »

It’s leaking somewhere. Took carb apart and cleaned everything. Would idle but nothing more than idle
Post Reply