Voltage Regulator Frame Bracket

Discussion topics on Willys Overland M series vehicles
Post Reply
Eades
Contributor
Contributor
Posts: 97
Joined: Mon Jul 09, 2018 6:00 pm
Location: Western Washington

Post by Eades »

I just welded it in place in the exact same spot the original was cut out. The bracket was engineered close to the original. The first pic is mocked up and the second is burned in and repainted. Good enough and on to the next repair.

Image

Image
Rick Eades
1951 M38 & 1967 M715
Top
Eades
Contributor
Contributor
Posts: 97
Joined: Mon Jul 09, 2018 6:00 pm
Location: Western Washington

Post by Eades »

Done and on to the next project.
Image
Rick Eades
1951 M38 & 1967 M715
Top
Post Reply

Return to “Technical Knowledge Base”