Page 6 of 6
Posted: Fri Nov 05, 2021 7:46 pm
by Naugha
“just remember the anti seize when installing the distributor.”
Thanks for the heads up.
What areas get anti seize in addition to the LPS2 & Artillery Grease?
Posted: Fri Nov 05, 2021 8:15 pm
by RonD2
Put some anti-seize on the area labeled in this photo as "the area that corrodes and sticks in the engine block".
Doesn't take much. A little with your finger of choice inside the top inch or so of the boss on the block and a little around the shaft in the area shown in the photo.
Give it a twist or two after you drop it in the hole, before you lock it down (after adjusting the timing).
Posted: Sat Nov 06, 2021 7:01 pm
by Naugha
Excellent.
Direct, valuable advice falls as gentile rain to a parched land.
Posted: Mon Nov 08, 2021 5:07 pm
by Naugha
Finished Product. It may even work
Posted: Thu Oct 06, 2022 5:30 pm
by FreeinFL
So, Did it work?!?
Excellent.