willysmjeeps.com

Rommel,

I moved your first event announcement to the Events board where it will get better response from folks looking for events. Let's try to keep this board on it's focus, which is parts.

http://www.willysmjeeps.com/v2/modules. ... wforum&f=8

Wes K

Web site co-owner

Sorry Wes. Thanks for the assist.

Anyway, since you guys asked for it.....here it is:



The M38 License plate holder. Soon available through your most convenient MDJuan dealer

Rommel

That looks like a square cut-out on the rear piece; the original has a stamped depression.
Is the metal removed here or am I seeing this wrong, do you have a picture of the other side?

here's another picture:



I'll try to get more pictures.

Sorry, but that image appears to be the same side only rotated 180 deg.
The back side of the license plate holder is what I was looking for.
Here is the area that I was questioning.



The original has a stamped depression or raised section depending on what side you are looking at. There is no metal removed at this point.
Your image "appeared" to have metal removed at this location.
It could be a combination of my eyes and the image that make it appear like this as I can't see the opposite side of the object.

Sorry for the confusion.

Pat Newman

you're right. I think we made a mistake in interpreting the drawings. we will revise.

It's really hard to wrok without a sample for us.

Rommel

Here's the revised prototype:

Quick question: Do the new and improved doors fold like the originals or are they fixed and non-foldable?

it's foldable!

Rommel,

You should have your engineering folks download my photo album for reference work.


The original M38 doors were foldable and could be stowed on the rear wheelhouse like these two doors on the driver's side wheelhouse in the M38 TM.


You can see the riveted bottom folding joint in this photo

Here are the pictures of the primered license plate holder





and we made the door frame handles boltable:

Hey Guys. Just wanted to share. Adam Sparks aka Sparky (founder of earlycj5.com) visited the MDJuan plant.

here's the link to his visit:
http://www.earlycj5.net/forums/showthre ... o-MDJuan!-)

It's more fun in the Philippines!!

are either the license frames or door handles at any dealers yet????

will keep you posted when it's already available.

I hope to have the parts available here in the US mid July

on the next container