Page 1 of 2
My 54 M38A1 project
Posted: Thu Jan 28, 2016 12:59 pm
by TGP
Picked this jeep up New Years Day and trying to put it back together
in Military dress as much as possible.
It's been converted to 12Volts and I'm probably going to leave that.
I do have the waterproof Dist. which I will rebuild and reinstall.
Currently gathering the rear seat and hardware and the Top ,bows and brackets.
I'm learning my way through this.
Thanks for a Great Site
Tom
Edited by management.[img]
http://willysmjeeps.com/v2/modules/gall ... ed.jpg[img]
Posted: Thu Jan 28, 2016 1:08 pm
by TGP
Got the Bow brackets installed as correctly as I could figure.
Also the footman loops.
All this was missing.
Tom
Edited by management.
Posted: Thu Jan 28, 2016 2:06 pm
by 4x4M38
Hi Tom,
Welcome!
You need to link photos with a beginning and end "img". They are different.
Begin with
Posted: Thu Jan 28, 2016 2:07 pm
by 4x4M38
Nice A1.
Congrats!
Posted: Thu Jan 28, 2016 2:09 pm
by RICKG
Diggin the PW too!
Posted: Thu Jan 28, 2016 2:17 pm
by TGP
Thanks!
That's what I was missing.
My other MV's
edited this to this
Only one set of bracketed img's at each end of the link. Second [/img] will appear the on your second click on the img icon at the top of the post. Management
Posted: Thu Jan 28, 2016 2:27 pm
by TGP
Thanks for fixing the links.
I will figure it out. Everything I know is Self Taught.
My other MV's
86 M1028A2,52 M37, 65 M35A1
Tom
Posted: Thu Jan 28, 2016 2:28 pm
by 4x4M38
Looks like you have it bad.....
Posted: Thu Jan 28, 2016 2:44 pm
by TGP
HA!
Yup!
But it's Fun
Between the MV's and all the vintage tractors and trucks I have
Plenty to keep me busy in retirement!
http://www.t137.com/cpg/index.php?cat=10010
Thanks!
Tom
Posted: Thu Jan 28, 2016 2:54 pm
by wesk
Try referring to my photo album when looking for detailed technical photos:
http://www.willysmjeeps.com/v2/modules. ... _album.php
and this sub-album:
http://www.willysmjeeps.com/v2/modules. ... _album.php
Have a member fill in the blanks for the measurements for you.
Posted: Thu Jan 28, 2016 3:32 pm
by TGP
Thanks WesK.
I have been all through your albums and a few others too.
The information you have compiled is Priceless.
New to the Jeep MD so it will be a easier road with all the help
Here
Shame there is no "Donate" link to help fund the site.
I always try to contribute to all the sites I visit either by
Knowledge when I can, and or Monetary.
TomP
Posted: Sun Jan 31, 2016 7:52 pm
by RonD2
Second on the "donate" button.
Posted: Mon Feb 08, 2016 7:37 am
by TGP
Picked up the Top Bows from the powder coater and installed.
Also removed the chopped up seat brackets by the former FD and
Welded in new replacements.
Tom
Posted: Tue Feb 23, 2016 8:07 am
by TGP
Well I finally got my rear seat installed.
After my seat arrived it was discovered that the frame pivot tube had been cut
Off at some point.
So after welding 1/4" back on each end it fit like it supposed to.
Thanks all for the help.
Tom
Posted: Thu Feb 04, 2021 1:17 am
by RangerF
Hi where can I get all the hardware for the fitting of the roof and sides ?
