Page 1 of 1
Slave receptacle.
Posted: Sun Jul 30, 2017 9:31 pm
by billybob
Does anyone know where I can get the male ends that plug in to the slave receptacle for jump starting an M38? I want to make up a set of jumper cables. Thanks in advance.
Posted: Mon Jul 31, 2017 12:10 am
by wesk
Be sure to specify single or dual pin!
1 pin receptacle
2 pin receptacle
1 pin cable ends
1 to 2 pin and 2 pin to 1 pin adapter.
They are very pricey.
Modern 1 pin $429.00
https://www.aerospecialties.com/aviatio ... connector/
Slave receptacle.
Posted: Mon Jul 31, 2017 5:31 am
by billybob
I'm sorry I forgot there was more than 1 type. It's the 2 pin type. Second from the top of your illustration.
Posted: Mon Jul 31, 2017 8:39 am
by wesk
Slave receptacle.
Posted: Mon Jul 31, 2017 3:37 pm
by billybob
Thank you Wes. That's what I am looking for. I'll certainly check it out. Thanks again.
