Page 1 of 1
Brakes, Removing Eccentric's
Posted: Fri Oct 26, 2018 5:33 pm
by longld
Any tips/tricks from you experienced people on removing old brake Eccentrics? These are the adjusters on the M38A1. Tougher than getting the drum off.....
cheers, lee
Posted: Fri Oct 26, 2018 8:44 pm
by zeke57
When I have a rusted nut I will heat it up real good with the propane torch then hit it with a few squirts of oil.
Posted: Fri Oct 26, 2018 9:02 pm
by longld
Haven't tried fire yet - may help get the oil in there....thx, lee