willysmjeeps.com

Afternoon all.

Slightly off topic but have a question on wiring up the horn on my 1942 GPW. The electrical system is a 12V. I'm missing the horn mounting bracket and the wire to the horn terminal from the steering column bushing wire - the wire between the firewall and the horn terminal. I also have a 3rd terminal and wire - not quite sure what that's for but still working my way through some Ron Fitzpatrick videos.

I can order the mounting bracket but can't find that individual wire. What can I use right now for a field expedient connection so that I have a working horn - until I can acquire the correct wire?

Thanks!
Josh

Have you visited the parts manual for your GPW? The copy of the 1949 version of the ORD 9 SNL G-503 I have list's the wire from the junction block to the horn as WO# A5081 or Ford # GPW14409. Referenced is illustration Fig 06-9.

Thanks Wes.

I was poking around in that manual but didn't see that part number. Until I get the right wire I thought I would grab one that would work from my local hardware store, just so I have a working horn for inspection and use.

Thanks.

Looking at the MB/GPW wiring diagram, I guess I don't understand the question. Horns have 2 connections, one is power, and the other is ground through the switch. Horn wiring couldn't be much simpler.

I have no clue what the "3rd terminal" you have might be, and you don't say where it is or otherwise describe it. More information (including photo's) might help generate useful answers.

I think most any 14 gauge wire from the auto parts store would work to get it up and running.

Good luck!

Ron,

I don't know what it's for. The only description I can provide is that it's not the two terminals used for power/ground to the horn. It's similar, on the other side of that part of the horn, and is threaded with a lock washer and nut on it. Seems superfluous for powering the horn.
I'll take a picture and share.

What I'm really looking for is the modern equivalent wire for the firewall-to-horn wire.

I don't want to send us down a rabbit hole either so I'll reach out to AJP where I got my horn from last year. I thought someone here might know.

Thanks all!

What I'm really looking for is the modern equivalent wire for the firewall-to-horn wire.

Any 14 gauge automotive wire from your local auto parts store is the modern equivalent. Unless you want the fabric covered color-coded stuff? If so, see this: https://brillman.com/product/14-gauge-c ... ided-wire/

14 gauge is plenty for 12V horn, but you can get 12 gauge if it makes you feel better.

I'm guessing your 3rd terminal, unless it has an insulator on it, is a supplemental ground for the horn casing. Not shown on the wiring diagram I'm looking at.

Thanks Ron.

That's what I was wondering about. Also not sure of the length. From the Ron Fitzpatrick video it looks about 6-7 inches long. I'll need that for ordering the cloth-covered cable from your supplier link.

In the meantime, 14 gauge it is. Also, the additional terminal actually has a rounded flat-head screw. I misremembered. So you're probably right about what it's for.

Thanks again!