willysmjeeps.com

Greetings:

I have a 24v battery maintainer that I would like to connect to the slave cable outlet on my M38. I am looking to go from the fender mounted outlet and adapt my 24v maintainer cord to the connector that is needed.

Any ideas would be greatly appreciated.

Thanks!

see the bottom of this thread.
http://www.willysmjeeps.com/v2/modules. ... ght=copper

Rick,

Thanks for the heads up. I am using the BatteryMinder maintainer for my jeep too.

The 5/16” copper tube is the trick for that application. Genius!