willysmjeeps.com

Need assistance to findout the pin-outs for the 3-pin power connector

US Army Signal Corp Radio diagrams in my photo album page 2.


Looks like C pin is not use. A - Plus 24V and B - Ground

Large file photo link: http://willysmjeeps.com/v2/modules/gall ... _28372.jpg

As always, Thank you Wes!

If it helps, I have the 65 page (pdf file) of the January 1956 Installation Instructions for Radio Sets GRC-9 or SCR-694 in Combination With Radio Sets GRC-3 to -8, VRC-1 to -3, VRC-8 to -10, VRC-16 to -18, PRC-8 to-10, and SCR-619 for the M38 and M38A1.

It has the drawing that Wes provided above, as well as dozens of others for cables, brackets, and mounts, including antennas.

I'd be glad to email, or perhaps it could be posted in the radio manuals section of the downloads page?

Ron, that would be appreciated if you can upload it on the website (download page).
Thanks

Hi Pierre,
I'm not allowed to upload stuff on the website.
I'd be glad to email it to Wes so he can upload it to the radio manuals section of downloads.

Please email me: lylew2@gmail.com

Hi Lyle,
I just now discovered that the email server I use has an attached file size limit so I can't send it via email.

I did go back and research where I originally found it --- and here's the link so you can see and download it for yourself:

https://radionerds.com/images/5/5d/GRC- ... nstall.pdf

Hope this helps.
Sorry for the confusion.
Good luck!

Lyle, Did you loose the copy I sent you last week?

Wes & Ron:

Thanks gents I have recieved the various manuals..

Slow response as I took the train from Vancouver to Halifax and drove around the maritimes... awesome trip.