Page 1 of 1
Lead Washers on M100
Posted: Thu Feb 19, 2009 8:25 pm
by Cacti_Ken
Did the M100 use lead washers on the reflector screws to prevent water leaking into the tub?
Posted: Sun Feb 22, 2009 9:19 am
by wesk
Yes, 8 each washer, plain, lead, 0.280 ID x 5/8" OD x 1/16" thick, DK# 73-1702, ORD PN 7328316.
Posted: Sun Feb 22, 2009 1:59 pm
by Cacti_Ken
Thanks, I didn't think about that when I was putting it together.
Posted: Mon Feb 23, 2009 12:15 am
by RickC
My M100 had them on the cable box mounting screws as well....