Page 1 of 1
what is the difference between M38& M38A1 air crossover
Posted: Fri Mar 17, 2006 3:21 pm
by Apatriot
Does anyone have the measurement differences between the two types of air crossover tubes?
I have an M38A1 tube and want to know if it is useable on an M38.
Thanks in advance.
Posted: Fri Mar 17, 2006 8:10 pm
by Ryan_Miller
I don't know the specific dimensions, but I believe the M38A1 used a longer tube and eventually switched to an "I" beam type configuration.
Posted: Fri Mar 17, 2006 11:30 pm
by Cacti_Ken
I was given this info about the M38 crossover pipe a couple months ago. The length is approximately 6 & 5/16 inches long
Posted: Sat Mar 18, 2006 10:34 am
by ChuckW
There is a considerable difference between the two, includingthe length, the mounting bracket, and the fitting locations. Bottom line: No, an M38A1 crossover tube won't work correctly on an M38.
Posted: Sat Mar 18, 2006 7:31 pm
by Ryan_Miller
Thanks guys for the help.
That is what I was thinking, but wasn't sure as I am not up on all the M38A1 stuff.
Posted: Sat Mar 18, 2006 8:47 pm
by wesk
