willysmjeeps.com

Posted: **Thu May 04, 2006 5:45 pm**

Hello Fellows,

I recently imported the fording kit for my 1951´ M38, but however I still without the mast (metal suport rad) that supports the inlet air pipe (that don´t came with the Kit)
This fording kit are composed by the pipe, and all the brackets and screws to fix the pipe at the Mast.
Well, now I´ll try to do this mast by myself.
Could somebody help me with the dimensions of this pipe?? I saw in a forum document that the total lenght is 57"
There is a complete draw of this?

Regards,

Luciano

Posted: **Thu May 04, 2006 7:08 pm**

I am working on a photo and some measurements for you.

Posted: **Thu May 04, 2006 8:10 pm**

Luciano you have mail!!

Posted: **Thu May 04, 2006 9:29 pm**

FYI, Brent Mullins carries this pipe... I got one from him a couple of months ago...

Hope this helps...

Posted: **Fri May 05, 2006 6:53 am**

Ken,

Great material! Is exactly what I'm looking for.
Now, I just need to find a good 1" tube and a couple of beers!!

OKCM38CDN, first I'll try to make it by myself. Other way, I'll contact Brent Mullins.

I'll post some pictures when I finish.

Thanks for all !!

Posted: **Sat May 06, 2006 1:03 am**

Hi can I ask where you bought your kit from? and did it have a replacement air intake hose with it,
Thanks,
Dave.

Posted: **Sun May 07, 2006 7:17 am**

Dave,

John at Midwest Military carries the hose... that is where I got mine from...

Hope this helps...

Posted: **Sun May 07, 2006 10:21 am**

This is the hose type original to the 1952 kit which came in a sealed crate.

willysmjeeps.com

Fording kit mast - Help

Fording kit mast - Help