Page 1 of 1
Having problems posting pictures from gallery to forum.
Posted: Sat Sep 20, 2014 3:06 pm
by M38CDN1952
Hello
I am using a mac! I have figured out how to post pictures to my gallery but every time I try to post to a forum it just does not work. In steady of a nice picture i just get the picture file name. HELP PLEASE
Posted: Sat Sep 20, 2014 9:37 pm
by wesk
Are you trying to load your photo directly from your computer to the posting?
Posted: Sun Sep 21, 2014 9:13 am
by M38CDN1952
I am trying to post from my photo gallery.
Posted: Sun Sep 21, 2014 10:02 am
by 4x4M38
To copy a photo you have to select "copy link URL" .
It is very easy to copy the link address by mistake.
You have to follow this format:
You can also click on the photo, making it larger, THEN copy the link address and post it below your URL.
It helps the bandwidth if you post smaller photos to begin with.
Folks can use the link address to look at larger photos of what you post.
Brian
Posted: Sun Sep 21, 2014 10:48 am
by wesk
Are you following the data posted here as a sticky:
http://www.willysmjeeps.com/v2/modules. ... pic&t=8670
The URL you use and how you select it will often vary with the browser type and weather you have a MAC or IBM based PC. It has been many many years since I punched a key on a MAC but I recall even in the 90's selecting a url to link to was a very different process on the MAC as opposed to the rest of the computer world's equipment.
Posted: Sun Sep 21, 2014 6:59 pm
by M38CDN1952
I am following the instructions on the sticky. I think that I will just have to figure it out by trial and error. If there are any Mac magician out there a little help would be great.
Darren
Posted: Fri May 05, 2017 7:45 pm
by charliebrowndog
Replying to an old post but I struggled and figured it out so I'll share. I am running a MacBook Pro with Firefox. To link a photo from Album to Post - this works for me:
1. Go to your Album and hover the pointer over the thumbnail OR exploded image you wish to link to the post.
2. Hit [control + right click] and select "Copy Image Location".
3. Go to your posting and type desired text in the box.
4. Hit [enter] to new empty line.
5. Click "Img" icon on top row of Message body box. This should paste the following four characters:
![Image]()
. #5 and #6 and #7 should all be on a single line run together - no spaces.
8. Click the "Preview" button at the bottom of the Post Reply box and admire your handy work.
Hope this helps...