Page 1 of 1
Master cylinder filler cap
Posted: Mon Sep 29, 2014 9:30 pm
by M606BR
Recently I've got a NOS master cylinder double baffle filler cap (WO-119513). After opening the original sealed packaging I'm in doubt about it's really a double baffle filler cap. By looking to the photo below, can anyone kindly confirm it for me?
Thanks for your help,
Luiz Felipe
Posted: Tue Sep 30, 2014 12:41 am
by chrisk
Hi Luiz Felipe,
That's the correct one for the (CI=Cast Iron)master cylinder WO-805238.
Chris
Posted: Wed Jul 11, 2018 7:23 am
by Eades
Where did you purchase the master cylinder cap? Mine is MIA.
Posted: Wed Jul 11, 2018 3:55 pm
by M606BR
Sorry, I don't remember. It was 4 years ago and I use to buy from many different suppliers.
Try Midwest Military. They probably have it.
Posted: Thu Jul 12, 2018 11:44 am
by longld
I believe I have an original cover from an M38A1 Marine Jeep that has a vent cap on it if you are interested.
Posted: Thu Jul 12, 2018 1:41 pm
by Eades
Thanks everyone for the ideas. I will try MWM as I have purchased many items from them so far.
Longld, if it is the same as the M38 and in good shape, I am interested.
Posted: Thu Jul 12, 2018 6:48 pm
by wesk
Keep in mind there were three that fit the M38. The one that came on the aluminum master cylinder, the standard civvy style cast iron with a baffled vent in the cap and the fording type cast iron with the threaded hole for the vent line to the air cleaner.
Posted: Fri Jul 13, 2018 11:40 am
by longld
Cannot find it right now but will keep looking, it is vented type with a threaded hole in the top for a vent hose, mine has a plug in it from a previous owner.
Posted: Sun Jul 15, 2018 7:01 pm
by Eades
Mine is most likely a civy as it has a plastic cap. Cast iron unit however and relatively new.
