Joined: May 09, 2005 Posts: 9 Location: Crete, ILL. MVPA 437
Posted: Thu Sep 08, 2005 10:45 am Post subject: M38A1 Rear diff setup specs needed
Hello all
I am in need of the clearence/tolerance specs for the reassembly of an M38A1 rear end. I need to know what is says about how to set the pinion bearings loading and same for the firrerential carrier assy. I found the info for my MB/GPW but I am not sure about the M Series.
Also if someone has a manual available for the overhaul for the diffs/trans/Xfer I would ike to get one. I think it is probably a "Body,frame & power train manual. That is the only manual, out of the hundreds I have, that I dont have.
The civilian manual covers it pretty well under the CJ3A or CJ5. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: May 09, 2005 Posts: 9 Location: Crete, ILL. MVPA 437
Posted: Fri Sep 09, 2005 11:57 am Post subject:
Wes
Thanks for the reply. I did see the powertrain manual from Portrayal at $28.00 The CD Rom has quite a bit of info fo $20. Either way I guess I'll have to order something, but now it's gonna hold up putting this reard end back together for another week, Oh well.
Either of the later CJ manuals give you the same data. SM 1002 or SM 1046. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: May 09, 2005 Posts: 9 Location: Crete, ILL. MVPA 437
Posted: Mon Sep 19, 2005 12:19 pm Post subject: I got the info
Wes
I got the info, I had bought the CD ROM a long time ago and forgot about it. Took a look and there it was with all the info I need. Now if the lousy bearing company will get my bearings in.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum