View previous topic :: View next topic |
Author |
Message |
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Sat May 25, 2013 7:17 pm Post subject: Front End Wobble |
|
|
It was a nice day to take a spin and it happened to me today. I was doing about 10mph, left front wheel contacted a bad spot in the road as I was coming out of a shallow turn to the right. Applied the brakes to get it to straighten out. I did about 20 miles rolling on various smooth and rough roads without it occuring again. I guess I hit it just right when it happened.
Completely restored front end about 5,500 miles ago. I haven't jacked it up yet to check any loose parts. Only thing that has play as far I know is the worm shaft/sector gear. Anyway, it sure surprised me when it happened.
Ken _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
wilfreeman Member
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
|
Posted: Sat May 25, 2013 7:41 pm Post subject: |
|
|
Mine does it every time I hit a certain hole in my driveway and on one road. My kingpins/bearings, tie rod ends, drag link, and steering gear are new or rebuilt. I have some play in my bellcrank - have a kit for it and an NOS pitman arm, just have to install them! Found my rear pinion seal had puked a puddle on the shop floor yesterday, so that will probably be addressed first. _________________ Matt
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog) |
|
Back to top |
|
|
skyjeep50 Member
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
|
Posted: Sun May 26, 2013 3:58 am Post subject: |
|
|
Have you checked steering knuckle king pin bearing pre-load? _________________ 1951 M38 |
|
Back to top |
|
|
Rotorhead Member
Joined: Jun 03, 2011 Posts: 28
|
Posted: Mon Jun 03, 2013 10:41 am Post subject: front end wobble |
|
|
I put new original-spec tires on and now have the 'wobble'. King pin bearings and/or steering box? I have the parts for the steering box - it's in rough shape with lots of play, so I'll start there first. But is there a way to positively check the king pin bearings without disassembly? Everything else in the front-end is new. Interesting that the old farm-type square-profile tires did not exhibit this wobble - ever. |
|
Back to top |
|
|
skyjeep50 Member
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
|
Posted: Mon Jun 03, 2013 11:16 am Post subject: |
|
|
You can check to see if there is free play in the wheels by jacking up each wheel and rocking the tire back and forth side to side and vertically. But you will not know just where the looseness is from without taking things apart. Wheel bearings, steering linkage, steering box, king pin bearings, etc., etc. Check everything for wear. Plus, by taking the front end apart you can clean, de-rust, repaint and repack bearings. All good things to do to make sure there are no more problems down the road. _________________ 1951 M38 |
|
Back to top |
|
|
wilfreeman Member
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
|
Posted: Mon Jun 03, 2013 1:32 pm Post subject: |
|
|
It sounds like an imposing job by reading about it and looking at pictures, but it is a really straight forward, fairly easy job to do. I'm sure you will find that all of the lubricant inside is hard too! _________________ Matt
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog) |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Mon Jun 03, 2013 1:32 pm Post subject: |
|
|
I haven't been able to jack the front end up yet. Other things around here are taking priority.
But while we are talking front end looseness. What do you all think about Walcks "TightSteer" adapter for the steering box. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
wilfreeman Member
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
|
Posted: Mon Jun 03, 2013 1:35 pm Post subject: |
|
|
It sounds like an imposing job by reading about it and looking at pictures, but it is a really straight forward, fairly easy job to do. I'm sure you will find that all of the lubricant inside is hard too! _________________ Matt
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog) |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
|
|
Back to top |
|
|
skyjeep50 Member
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
|
Posted: Mon Jun 03, 2013 1:45 pm Post subject: |
|
|
I don't think it targets the right problem with a solution in my opinion. I own a M38, a M38A1 and had a CJ2A-M38 hybrid. I rebuilt the steering gears of each and went through the front knuckles and axles cleaning them out and installed new brakes, lines, hoses, bearings, seals and adjusted everything to the proper specs. It's a dirty, greasy, messy, time consuming job but there is no substitute if you want the jeep to run right. On these jeeps, the steering system tends to be one of the most neglected systems. _________________ 1951 M38 |
|
Back to top |
|
|
Rotorhead Member
Joined: Jun 03, 2011 Posts: 28
|
Posted: Tue Jun 04, 2013 11:56 am Post subject: M38 Wobble |
|
|
OK. Thank you for the info. I'm going to do both - steering box and king pin bearings. Any special tools required for either job - like a hub-puller? Any tips/tricks? And can anyone point me in the right direction for a good vendor that sells a complete kit (ie. king pins bearings, knuckle seals, wheel bearings, spindle/pinion seals, etc) - I'd like to change everything while I'm in there - once!!! RFP, perhaps? |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
skyjeep50 Member
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
|
Posted: Tue Jun 04, 2013 12:15 pm Post subject: |
|
|
The only special tool needed will be a small hand held spring scale like is used to weigh fish - it is used to measure king bearing pre-load. Perhaps a gear puller. You can research the maintenance manuals on this site in the "Downloads" section for procedures and parts. There are a number of suppliers for parts - Midwest Military www.midwestmil.com would be one source. E-bay, too. You might need to take everything apart, clean, and then evaluate what to replace and what is still serviceable. If you get stuck or have questions, check back in with this webpage. _________________ 1951 M38 |
|
Back to top |
|
|
|