View previous topic :: View next topic |
Author |
Message |
M384X4 Member
Joined: Dec 12, 2012 Posts: 17
|
Posted: Sun Jun 08, 2014 9:17 am Post subject: Jeep gallops down the road |
|
|
The jeep, M38, travels like the tires are oval?!! Especially at low speeds? All the tires are new from AJP. Granted the rims are old and needed a lot of lead to balance. Do you think its the rims? Hate to buy new if it turns out to be something else like rear bearings? front bearing are all new. I can't get any loose movement from the rear tires when it is on jacks. Axle bearings?
What should I go after first? |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
M384X4 Member
Joined: Dec 12, 2012 Posts: 17
|
Posted: Wed Jun 11, 2014 2:25 pm Post subject: |
|
|
up and down motion on a very flat road. Not as noticeable at higher speeds.
7:00 x 16 Cross Country Tire NDCC 6 ply rated |
|
Back to top |
|
|
OKCM38CDN Member
Joined: Feb 17, 2012 Posts: 530 Location: Del City, OK
|
Posted: Wed Jun 11, 2014 3:43 pm Post subject: |
|
|
One question, have you put tubes in the tires or are you running them as tubeless tires...
Reason I as is that I was instructed by my dad (ran a gas station back in the 50s and 60s) to sprinkle baby powder in the tires before installing the tubes, then partially inflate the tubes, bounce them hard on the ground, deflate bounce them again... do this a couple of times to get the tubes to settle into the tire evenly; when completed pressurize to operating pressure...
Reason for the baby powder is it allows the tubes to move inside the tire and settle...
Hope this helps... _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
buzzk Member
Joined: Dec 03, 2013 Posts: 197 Location: Saint Augustine , Florida
|
Posted: Thu Jun 12, 2014 8:51 am Post subject: galloping |
|
|
If the tires have been sitting for a long,long time they will have flat spots and takes time to work them out buzz |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
Posted: Thu Jun 12, 2014 9:48 am Post subject: |
|
|
Quote: | Are the tire's sidewall plies nylon or polyester reinforced? |
You didn't answer this question but you did ID the brand & size of the tire. If the tire is nylon and 4 ply (reads 6 Ply Rated) then you have 2 ply nylon sidewalls and the tire will take a set (flat spot so to speak) in a week or two of sitting that will take a few hours of driving to beat out of the sidewall. This will result in wheel hop or vertical bouncing. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
|
Posted: Thu Jun 12, 2014 10:13 am Post subject: |
|
|
When running Cooper NDCC nylon 6 ply rating tires on my M38 they would
develop the "flat spot" after a week and would take miles to round out,
especially in cold weather. Never did like them. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
Posted: Thu Jun 12, 2014 10:33 am Post subject: |
|
|
In the 40's through the 50's it was the most popular reinforcing material for tire sidewalls but by the 60's Polyesters won the battle and have been the leader along with kevlar ever since. Repop tire makers want to give you all the feel of the old style nylon tire so they use nylon and you learn the hard way there's nothing wrong with your suspension. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
|
Posted: Thu Jun 12, 2014 10:47 am Post subject: |
|
|
The STA Super Traxions I'm running now are 4ply nylon cord @ both
tread and sidewall and display none of the annoying characteristics
of the NDCC's I was running before. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
|
Posted: Thu Jun 12, 2014 11:07 am Post subject: |
|
|
The only visible difference, besides tread pattern,
that I can see is the rubber compound softness.
The NDCC's were hard as a rock, the Super Traxions are
much softer. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
RICKG Member
Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO
|
Posted: Thu Jun 12, 2014 11:25 am Post subject: |
|
|
wesk wrote: | Bias/Radial, tube/tubeless, size? |
This info off the tire:
Tube type, 6.50-16 LT.
4 ply nylon tread
4 ply nylon sidewall
6 ply rating
Load range C
Bias ply per their website. I'm not finding any other
construction or mfg info on the link..
http://www.stausaonline.com/product-category/light-truck-tires/ _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a |
|
Back to top |
|
|
|