Joined: Sep 18, 2012 Posts: 589 Location: South East Saskatchewan
Posted: Tue Apr 14, 2015 7:31 am Post subject:
I am trying metal shot in my cabinet, I really like it, the cutting power isn't there but it doesn't break down and there is no dust, it also leaves a much nicer surface for the parts where that matters. I also have a blasting pot now and have started the frame, the thing stops up so easily though, anyone have some tips on keeping an old syphon pot going? _________________ Carievale Saskatchewan Canada
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album210&op=modload&name=gallery&file=index&include=view_album.php
Joined: Sep 18, 2012 Posts: 589 Location: South East Saskatchewan
Posted: Tue May 26, 2015 2:55 pm Post subject:
Still working away at the frame, I have it about half done and just got more sand and paint so if it gets to a temperature where your brain doesn't fry I will get more done.
I was digging through one of the parts boxes I got last year and found this nice kit
also have some mystery parts hopefully someone knows what they are, my parts manuals don't have the numbers from the boxes listed.
the brown box says 2-640545 oils seal group 36-02C and is from willy's in Toledo. The two brass ones are from the red and blue jeep box and the black one is metal on the outside with a rubber coating and a rubber lip with spring on the inside it was just loose in the larger box.
Any hints to what this stuff is would be appreciated. _________________ Carievale Saskatchewan Canada
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album210&op=modload&name=gallery&file=index&include=view_album.php
Joined: Sep 18, 2012 Posts: 589 Location: South East Saskatchewan
Posted: Wed May 27, 2015 7:36 am Post subject:
Thanks Wes. found a couple more parts one is in the list as bearing, ball, clutch release so that sounds like a good one to have, the other is I think the PCV but the part number is illegible on it and there is no box.
Those can still be had new. I would rather go with new for the PCV. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Sep 18, 2012 Posts: 589 Location: South East Saskatchewan
Posted: Sat Jan 21, 2017 3:35 pm Post subject:
Well things have been going slow but I went to the local auction on Thursday and bought a box lot for $5 just because I saw a valve spring compressor of the right type. Dug into it finally today and hit the jackpot, there was also a piston ring sleeve, ring groove cleaner, a drum brake caliper graded in .030, a cylinder hone, a 36in long pipe wrench, a smaller 24in long pipe wrench, along with other assorted non automotive tools. I was just amazed nobody bid against me for it since I made out like a bandit. I know I am bragging have to about something since the jeep is coming so slow _________________ Carievale Saskatchewan Canada
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album210&op=modload&name=gallery&file=index&include=view_album.php
All times are GMT - 6 Hours Goto page Previous1, 2, 3, 4
Page 4 of 4
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum