Joined: Jun 11, 2015 Posts: 129 Location: Orem, Utah
Posted: Tue Sep 27, 2016 2:29 pm Post subject:
Thanks for posting that Rick. Also an update on my Jeep. We are almost ready to put paint to the tub. Just welded some holes last night and working on cleaning the rest of the dirt and rust out of the small hard to get places. Once it is all clean, make the welds look nice and then paint. _________________ Wade Stout
www.freedomvehicles.org
Joined: Jun 11, 2015 Posts: 129 Location: Orem, Utah
Posted: Fri Oct 28, 2016 2:46 pm Post subject:
The tub has been painted and am going to be placing the tub on the frame this weekend. Then I will clean up all the other parts, windshield, hood, floor pans, and misc little parts, and assemble those on after paint throughout the next few weeks. _________________ Wade Stout
www.freedomvehicles.org
Joined: Jun 11, 2015 Posts: 129 Location: Orem, Utah
Posted: Mon Nov 21, 2016 10:15 pm Post subject:
Well, I set the tub on the frame today, and man, just like that I have tons of motivation to get this thing done!!
I still have all the front end body parts to finish and paint, and then I need to do wiring, and upholstery. then I think I am about finished!! wow.
Also as fars as mounting bolts go, what did you all use? I have my originals that I pulled off, but they are all different sizes and such.
Maybe Bretto can bring his jeep over _________________ Wade Stout
www.freedomvehicles.org
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
Posted: Tue Nov 22, 2016 5:32 am Post subject:
Wade, I'm not put together 100% per the book's specs but your welcome to take a look at mine anytime. _________________ Brett
'51 M38
PHOTO DIARY OF MY BUILD
Joined: Aug 31, 2010 Posts: 1740 Location: SO IDAHO
Posted: Tue Nov 22, 2016 8:07 am Post subject:
Fotos or it didn't happen!! I know you still have work to do on the fenders and such but I'll recommend you test fit them, the grille and hood to the tub before snugging the tub down tight to the frame. Now is the time to be adjusting shim thicknesses at the mount rubbers for good alignments. _________________ keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a
Wade, Your email system is bouncing our web site's notification emails to you. Please check your mail system and server. The bounce notices create an additional work load on our site operators. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Jun 11, 2015 Posts: 129 Location: Orem, Utah
Posted: Tue Nov 22, 2016 3:50 pm Post subject:
OK cool thanks all.
Wes I did check my email, I think I fixed it, but that is weird, first time its done that, it as always worked fine.
Also as far as pictures go, how do I join the photo gallery so I can have an album in there and use that to post my pics? _________________ Wade Stout
www.freedomvehicles.org
I just received this bounced email at 2214 tonight.
Quote:
Subject Mail delivery failed: returning message to sender
From Mail Delivery SystemAdd contact
To www-data@willysmjeeps.comAdd contact
Date Today 22:14
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
wstout@freedomvehicles.org
SMTP error from remote mail server after MAIL FROM:<www-data@willysmjeeps.com> SIZE=2384:
host mail.freedomvehicles.org [50.116.82.246]:
550 Access denied - Invalid HELO name (See RFC2821 4.1.1.1)
------ This is a copy of the message, including all the headers. ------
Return-path: <www-data@willysmjeeps.com>
Received: from www-data by gandalf with local (Exim 4.71)
(envelope-from <www-data@willysmjeeps.com>)
id 1c9OxG-0007oC-Ho
for wstout@freedomvehicles.org; Wed, 23 Nov 2016 04:14:42 +0000
To:
Subject: Topic Reply Notification - M38 Jeep Restoration MC21002
X-PHP-Originating-Script: 1000:emailer.php
Reply-to: admin@willysmjeeps.com
From: admin@willysmjeeps.com
Message-ID: <6aa90a8ce17ef72922e539e56c55f14c@willysmjeeps.com/v2>
MIME-Version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 8bit
Date: Wed, 23 Nov 2016 04:14:42 +0000
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: PHP
X-MimeOLE: Produced By phpBB2
Hello,
You are receiving this email because you are watching the topic, "M38 Jeep Restoration MC21002" at willysmjeeps.com. This topic has received a reply since your last visit. You can use the following link to view the replies made, no more notifications will be sent until you visit the topic.
If you no longer wish to watch this topic you can either click the "Stop watching this topic link" found at the bottom of the topic above, or by clicking the following link:
The only reason I am posting this here is because a PM, and an email from my personal email system I sent to you were never answered. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: Jun 11, 2015 Posts: 129 Location: Orem, Utah
Posted: Wed Nov 23, 2016 10:13 am Post subject:
I did get a personal email from you, and I tried to fix it using what you told me there, I guess it didn't work. I will pm you a different email address, and see if that works. _________________ Wade Stout
www.freedomvehicles.org
Joined: Jun 11, 2015 Posts: 129 Location: Orem, Utah
Posted: Wed Dec 14, 2016 3:58 pm Post subject:
Most of the other parts like floor boards, grill, hood, and such painted. Now to assemble and then put another final coat on everything. _________________ Wade Stout
www.freedomvehicles.org
Joined: Nov 24, 2010 Posts: 1390 Location: Orem, UT
Posted: Thu Dec 15, 2016 5:28 am Post subject:
Sounds like you'll have her ready for your next years activities.
Have you fire up the engine yet?
Still no pics! _________________ Brett
'51 M38
PHOTO DIARY OF MY BUILD
Wade is not getting the web site email notices again. Which is probably why he hasn't replied here.
Quote:
wstout@freedomvehicles.org
Quote:
Subject Mail delivery failed: returning message to sender
From Mail Delivery SystemAdd contact
To www-data@willysmjeeps.comAdd contact
Date Today 05:28
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
wstout@freedomvehicles.org
SMTP error from remote mail server after MAIL FROM:<www-data@willysmjeeps.com> SIZE=2351:
host mail.freedomvehicles.org [50.116.82.246]:
550 Access denied - Invalid HELO name (See RFC2821 4.1.1.1)
------ This is a copy of the message, including all the headers. ------
Return-path: <www-data@willysmjeeps.com>
Received: from www-data by gandalf with local (Exim 4.71)
(envelope-from <www-data@willysmjeeps.com>)
id 1cHUDI-00088A-Sx; Thu, 15 Dec 2016 11:28:40 +0000
To:
Subject: Topic Reply Notification - M38 Jeep Restoration MC21002
X-PHP-Originating-Script: 1000:emailer.php
Reply-to: admin@willysmjeeps.com
From: admin@willysmjeeps.com
Message-ID: <1721dc5a4b7aa9576f20f583aaa20ff6@willysmjeeps.com/v2>
MIME-Version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 8bit
Date: Thu, 15 Dec 2016 11:28:40 +0000
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: PHP
X-MimeOLE: Produced By phpBB2
Hello,
You are receiving this email because you are watching the topic, "M38 Jeep Restoration MC21002" at willysmjeeps.com. This topic has received a reply since your last visit. You can use the following link to view the replies made, no more notifications will be sent until you visit the topic.
If you no longer wish to watch this topic you can either click the "Stop watching this topic link" found at the bottom of the topic above, or by clicking the following link:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
