PTO winch

Ryan · Posted: Thu Jan 11, 2007 5:16 pm Post subject: PTO winch

I may be in the market for a ramsey Pto winch, (civilian versian). I have a Ramsey PTO that came with the jeep and the long straight shaft and bearing as well. All I would need is the winch and the mounting brackets. How much can I expect to pay for something like this?

wesk · Posted: Sun Jan 14, 2007 12:33 pm Post subject:

About $75 to $200 depending on condition. You may have to custom build a mount and fair lead assemblt to fit the M38's original mounting holes. Which Ramsey PTO do you have? The civvy PT1 or PT1J doesn't fit well with the stock M38 exhaust. The Ramsey 105A made just for the M38 does.

As you can see from the photos there is a significant difference where the front winch drive shaft fits with these two PTO's.

This is the exhaust location with either of the long PTO's by Ramsey or Koenig.

This is the military 105A PTO. It tucks the drive shaft in close to the tranny and allows the exhaust to stay in it's original location.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

Ryan · Posted: Sun Jan 14, 2007 8:43 pm Post subject:

It is the civilian pto. If I end up with a winch I will carry the jeep to an exhaust shop and have them fit my pipes correctly.

LoboMike · Posted: Mon Jan 15, 2007 7:07 am Post subject: RE: PTO

I have one mounted on my M38 that isn't used. I'm not sure what's entailed in removing it, but if it's worth the effort I'll make it available. It's located in central NC.

HTH

gamillerman · Posted: Fri Jan 19, 2007 1:34 pm Post subject: PTO

Which type of PTO do you have and how much would you be asking for it

Thanks

Ron

LoboMike · Posted: Sat Jan 20, 2007 6:48 am Post subject: RE: PTO only

It's a Ramsey and I'll get out to check the model this weekend. Not sure what I want as I wasn't trying to sell it. I offered it if it helps some one and the trouble doesn't exceed the value.

Mike

LoboMike · Posted: Sun Jan 21, 2007 12:52 pm Post subject: RE: PTO

Best I can show is the PTO on my M38 appears to be the following:

http://home.earthlink.net/~lobomikem38/images/Ramsey%20PTO.jpg

This pic is courtesy of Wes and not the one currently in the vehicle. Best effort to read tag is futile while mounted, but the tag is present and the casting numbers match those pictured.

Sorry I can't provide more. Mike


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.