Do you have a aux power (slave) receptacle on the right fender? If so where are it's two cables connected?
Disconnect the two heavy wires that share one post (one should be from the cowl battery and one from the voltage regulator harness.)(if you have a slave receptacle and if the cable from the Slave receptacle is also connected there then leave it there) from the switch on top of the starter and bolt them together. Insulate them with tape or something. Now turn the lights on. If the lights are bright buy a new switch for the starter. If they are still dim you have a loosed battery terminal, or a corroded terminal/cable/post or a bad battery. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
All times are GMT - 6 Hours Goto page Previous1, 2
Page 2 of 2
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
